Archives

Plain/Woven Fabrics

Fabrics can be up to 4x stronger than blankets in terms of tensile and impact resistance. However, what stands out in the blanket or short fibers is the multidirectional resistance of the piece (isotropy). TEXIGLASS® manufactures fiberglass fabrics from...


sidedoor

20 May 2022

TEXICARBON (Structural reinforcement)

Its use is common in the recovery of beams, bridge columns, viaducts, buildings and cell phone poles. In addition to the ease of application, it provides an increase of up to 3 times the compressive strength and with up...


sidedoor

19 Apr 2022

Meshes and Grids

• GI 53 RA 05 – 3mm x 3mm mesh; • GIX 96 RA 05 – 3mm x 3mm mesh with textured yarn; • GI 125 RA –  3.5mm x 3.5mm mesh; • GI 123 RA –  5mm x 5mm...


sidedoor

19 Apr 2022

Multiaxial Fabrics (Carbon Fiber and Fiberglass)

better performance when using a more accurate process, such as vacuum infusion. At TEXIGLASS®, multiaxial fabrics can be made of fiberglass or carbon fiber and in different weights. The most common multiaxial fiberglass fabrics are “1808” (600g/m² fabric +...


sidedoor

19 Apr 2022

Coated Fabrics (Aluminized / Silicone)

in which the fiberglass fabric with silicone is applied, and in applications where it is necessary to isolate the equipment completely, such as those of an external heat reflection system; then the fiberglass fabric with aluminum is used to...


sidedoor

19 Apr 2022

Spread Tow TeXtreme® Carbon Fiber

We can help with the entire process development. Check out the technical article kindly provided by the Oxeon company, owner of the Textreme technology, which is exclusively represented in Latin America by Texiglass. Applications: Aircraft and UAVs (Unmanned Vehicles,...


sidedoor

19 Apr 2022

Reinforcements (mesh) for abrasive discs

impregnated with phenolic resins and cut in diameters according to the customer’s request, or even supplied in 100m linear rolls (see widths). See below the articles of our most common mesh (articles and weights): • GI-48 (53g/m²) • GI-87...


sidedoor

19 Apr 2022

REBAR – Fiberglass Rebar

In addition to all the advantages presented, fiberglass rebar does not suffer from corrosion, which is the biggest cause of structural issues when reinforcement steel is exposed. Below are the most common fiberglass rebar diameters: • 6mm • 12,5mm...


sidedoor

19 Apr 2022

PrePregs

to the part manufacturing process, through a heated press, autoclave or oven, for example. Time, temperature and pressure are determined according to resin type and system. Thermosetting resins do not return to their original state even if heated, so...


sidedoor

19 Apr 2022

CIDEX® Fiberglass Grid

As it is a complex application process, in addition to supplying the grids, Texiglass provides a technician for on-site monitoring of the initial applications. Widths can vary between 2.05 and 3.80 m and all meshes contain a surface veil...


sidedoor

19 Apr 2022